Cement Cube Molds , CCM-4110
HOME » PRODUCTS » DRILLING FLUIDS & OIL WELL » Cement Curing Chamber » Cement Cube Molds , CCM-4110

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Cement Cube Molds , CCM-4110

The Cement Cube Mold is used to form 2" (50.8 mm) cube samples for compressive strength testing of Portland cement, mortars, lime, gypsum and capping compounds.

2-Unit,4-Gang   Cement Cube Mold

Sample   Size: 2" (50.8 mm) cube

Availability:
Quantity:
  • CCM-4110

  • RIGCHINA

  • 4110

Cement Cube Molds

Designed and manufactured in strict conformance to ASTM and AASHTO specifications

 

1.   Wide flange design for mold stability and performance

2.   Precision machined forged bronze construction for accuracy and corrosion resistance

 

The Cement Cube Mold is used to form 2" (50.8 mm) cube samples for compressive strength testing of Portland cement, mortars, lime, gypsum and capping compounds. The main feature in the design is the wide flange construction of the top and base. This wide flange simplifies the striking off of excess amounts of cement when the cubes are being prepared and gives greater stability to the mold in storage, preparation and curing. The sturdy flanges prevent warping of the mold during use.

Warping has been the cause of cement cube molds losing their dimensions and angular tolerances. The molds use mechanical screw clamps to connect the two halves of the mold so they can be drawn tightly together. This same feature is important in removing cubes from the mold. With an unscrewing action on the clamps, the two sides of the mold can be drawn apart uniformly. This eliminates prying the mold sections apart with a trowel, knife or other sharp instrument, a practice which destroys mold surfaces and springs the mold out of tolerance.

The "T" bolts are held in place by snap rings, which precludes loss and allows for ready replacement should the "T" bolt be damaged. To facilitate cleaning of the mold, all of its surfaces are clean-lined and smooth.

 

Cement Cube molds Specifications

Part No.

Model

Description &Technical Parameters

Remark

4110

CCM-4110

2-Unit,4-Gang   Cement Cube Mold

Sample   Size: 2" (50.8 mm) cube

Construction:   Solid Brass; top and base; machined and ground finish

Mold   Closure: Mechanical; Screw clamps held in place by pins

Base   Plate: Machined brass

Weight:  17.6 lbs. (8 kg)


4112

CCM-4112

4-Unit,8-Gang   Cement Cube Mold

Sample   Size: 2" (50.8 mm) cube

Construction:   Solid Brass; top and base; machined and ground finish

Mold   Closure: Mechanical; Screw clamps held in place by pins

Base   Plate: Machined brass

Weight:   Net 61.6lbs. (28 kg)


Previous: 
Next: