Hamilton Beach Mixers Model HMD-200
HOME » PRODUCTS » DRILLING FLUIDS & OIL WELL » Blenders & Mixers » Hamilton Beach Mixers Model HMD-200

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Hamilton Beach Mixers Model HMD-200

The mixers are recommended for use in general purpose mixing of drilling fluids in preparation for laboratory tests of mud materials.

Speeds: 0-18,000 RPM, No of Speeds: 3(Low, Medium, High). 

1 spindle,Volume: 1500ml

Availability:
Quantity:
  • HMD-200

  • Hamilton

  • 205970

Hamilton Beach Mixers

The Hamilton mixers are recommended for use in general purpose mixing of drilling fluids in preparation for laboratory tests of mud materials.

Speeds: 0-18,000 RPM, No of Speeds: 3(Low, Medium, High). 1 spindle,Volume: 1500ml

 

Most drilling fluid formulations contain a base liquid and additives which must be dissolved or mechanically dispersed into the liquid to form a homogenous fluid. The resulting fluid may contain one or more of the following: water-dispersible (soluble) polymers or resins, clays or other insoluble but dispersible fine solids, and soluble salts.

The fluids are mixed or sheared for times appropriate to achieve a homogenous mixture and are then set aside to "age." Drilling fluid aging is the process in which a drilling fluid sample, previously subjected to a period of shear, is allowed to more fully develop its rheological and filtration properties.  Aging is done under conditions which vary from static to dynamic and from ambient to highly elevated temperatures.

Hamilton Beach Mixers, Single and Three-Speed Models are recommended for use in general purpose mixing of drilling fluids in preparation for laboratory tests of mud materials. The Three-Spindle Model has independent speed controls for each spindle. These mixers can also be used to mix cement for field or laboratory testing

 

Hamilton Beach Mixers Specifications

Part No.

Model

Description   &Technical Parameters

G.W.

205970

HMD-200

1   spindle, Speeds: 0-18,000 RPM

No   of Speeds: 3(Low, Medium and High)

Volume:1000ml ;
  220V±5%AC; 50Hz; Power: 200W;

12kg

205974

HMD-400

3 spindles, Speeds: 0-18,000 RPM.
  No of Speeds: 3 (Low, Medium and High)

Volume:1000ml*3
  Power Supply:220V±5%AC; 50Hz

Power: 600W

28kg

Previous: 
Next: