Standpipe Gauges provide a quick, accurate display of pump pressure. Main applications are for standpipes and to be mounted on mud pumps. This style of gauge has been in service for many years and has proven to be a tough, dependable and reliable way to monitor pump pressure.
The Core Saturator for saturation of core samples (saturator) is intended to saturate the core samples brine, oil or other formation fluids sequential operation vacuum evaporation and saturation.
Thermocups and cup heaters are designed for controlling the temperature of a mud sample while taking readings with a rheometer or viscometer. Normal heat-up time is 30 minutes and the pilot light turns on when the well reaches the set temperature. Drilling fluid has a low thermal c
The Marsh Funnel Viscometer is a rugged, easy to operate instrument that is used for making rapid, on the spot measurements of drilling mud viscosity. The Marsh Funnel readings are only general measurements, but the frequent reporting of the Marsh Funnel Viscosity will alert the mud engineer to sudden changes in the mud viscosity that could require corrective action.
The Marsh Funnel Viscometer is a rugged, easy to operate instrument that is used for making rapid, on the spot measurements of drilling mud viscosity. The Marsh Funnel readings are only general measurements, but the frequent reporting of the Marsh Funnel Viscosity will alert the mud engineer to sudden changes in the mud viscosity that could require corrective action.
Monitors and displays number of strokes and stroke rate for Three mud pumps The Pump Stroke Counter/Rate Meter displays both the total number of strokes and the strokes per minute for 3 mud pumps up to 1,024 strokes per minute for each pump. Push buttons conveniently located on the front of the instrument make it easy for the operator to reset each pump count
Easy to use and maintain, gives operators accurate readings of sandline depth. Hand held Sandline Depthometer's help operators avoid situations that can cause damage to their sandline and possible safety issues with sandline. Mechanical Depthometers can be used on workover rigs, casing set rigs and mining coring rigs.
Accurate torque measurement systems reduce drill collar and tool joint failure The Tong Torque Systems indicate the torque applied to drill pipe, drill collars, tubing, and casing while joints are made — important for reducing drill collar and tool joint failure resulting from improper make-up.
Dead Weight calibration checks help maintain the accuracy of the torque measuring system on all Viscometers. Quickly determine the condition of bearings and the accuracy of torsion spring setting. Kit includes support bracket, spool for bob-shaft, 5 metric weights, spare thread, instructions, and case.
The 4:1 Dual-pointer pressure indicator with Shut-off Switch System deliver accurate measurements for mud, cementing, acidizing, and fracturing operations. Provides quick, accurate check on mud pump operation; helps detect washed out drill pipe or bit nozzle problems.
The LED Light Pump Pressure Gauge use a tuning fork, fluid cell system as the main components. This system has proven to be the most reliable for these types of operating conditions.
Standpipe Gauges provide a quick, accurate display of pump pressure. Main applications are for standpipes and to be mounted on mud pumps. This style of gauge has been in service for many years and has proven to be a tough, dependable and reliable way to monitor pump pressure.
